CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones página 15

If the SP key and the UP or DOWN keys are pressed continuously, the temperature setting
NOTE:
will change quickly. To change the temperature slowly, press one step at a time.
The L126 Dual can have separate SET-POINTS for each heated surface.
Press the DOWN key to change between right and left temperature readings.
Right Temperature Reading:
ACTION
Press the SP key, and the display will fl ash between "r °C" / " r °F" and the
SET-POINT temperature. ("r °C" / " r °F" means the SET-POINT for the
right side).
Hold down the SP key and press the UP or DOWN key to change the set-
point temperature. When the SET-POINT is set, release both keys.
Left Temperature Reading:
ACTION
Press the SP key, and the display will fl ash between "L °C" / " L °F" and the
SET-POINT temperature. ("L °C" / " L °F" means the SET-POINT for the left
side).
Hold down the SP key and press the UP or DOWN keys to change the set-
point temperature. When the SET-POINT is set release both keys.
NOTE: It is only possible to have two SET-POINTS if the SP function in the menu is set to "L-r".
INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
15
KEY
KEY