The Dual Set-Point (Sp) - CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones

INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)

6.9.4 The Dual Set-Point (SP)

This option is for the L126 Dual Workstation to have diff erent set-points for the right and left sides of the
workstation.
Follow these steps to navigate in the Dual Set-Point (SP) option.
ACTION
Press and hold both the UP and DOWN keys for 3 seconds
to enter the menu.
The menu "uSEr" will appear in the display.
Press the SP key once, then press the DOWN key until the
option SP appears in the display.
Press and hold the SP key to change the values.
While holding the SP key, press either the UP or DOWN
key to choose between "onE" or "L-r".
Press and hold both the UP and DOWN key for 3 seconds
to exit the menu.
If the SET-POINT is set to "onE", there is one temperature Set-Point for the right and left sides of the
workstation.
If the SET-POINT is set to "L-r", there are two diff erent Set-Points, one for the right side and another for
the left side of the workstation.
24
KEY DISPLAY