Gassing Station Operation; Establish The Flow Rate - CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones

INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
9

GASSING STATION OPERATION

Gas Mixture Connection
The gas supply is connected at the back of
the workstation.
A maximum regulated gas mixture pressure
is 0.5-0.7 bar (7.25-10.15 psi).
WARNING
9.1

Establish the Flow Rate

The fl ow rate is adjusted by a needle valve connected to a fl ow meter. The regulating range is 0-50 liters
per hour.
A fl ow rate should be chosen between 5 and 20 liters per hour, depending on the application and how
often the CO incubation hood is lifted.
2
Exceeding this pressure
could damage your
workstation.
38