Operating The Microscope Light; Light Source (Ls112 Led); General Description - CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones

INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
9.4

Operating the Microscope Light

The workstations may be fi tted with various types of microscopes. Refer to the appropriate Instruction
Manual for operating the microscopes.
ACTION
The microscope light source can be turned on and adjusted when using
K-SYSTEMS light source (LS112) and pressing either the ▲ (increase
intensity) or ▼ (decrease intensity).
The microscope light is switched OFF by pressing both the
releasing them.
NOTE: Always turn off the light when it is not in use. This will increase the lifetime of the bulb.
10

LIGHT SOURCE (LS112 LED)

10.1

General Description

The LS112 Light Source with LED Light is designed for
inspection of gametes and embryos.
The design of the mirror makes it possible to position the light,
which enhances diff erent morphological characters of the cells.
Additionally, the Light Source has virtual dark fi eld illumination
and slots for green, red or blue fi lters.
LS112 is designed to be installed in K-SYSTEMS Workstations. Installation should only be done by
authorised service personnel.
ORDER CODE
41093
DESCRIPTION
LS112 LED Light Source series
40
and ▼ then
KEY