Auto-Start (A-St) - CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones

6.9.3 Auto-Start (A-St)

The A-St (Automatic Start) option is used to repeat the timer (St.St) function every day of the week.
NOTE: This function works in conjunction with St.St, FAn and hEAt. If St.St is set to 8.00
and hEAt function is on, the heater will automatically turn on at 8:00 AM every day.
Follow these steps to navigate in the Auto-Set (A-St) option.
ACTION
Press and hold both the UP and DOWN keys for
3 seconds to enter the menu.
The menu uSEr will appear in the display.
Press the SP key once, then press the DOWN
key until the option "A-St" appears on the display.
Press and hold the SP key to change the values.
While holding the SP key, press either the UP or
DOWN key to select between ON or OFF.
When the required setting is activated, release
the SP key.
Press and hold both the UP and DOWN keys for
3 seconds to exit the menu.
NOTE: If this function is set to ON, the HEAT and/or FAN function will be repeated every day, but if the
A-St function is set to OFF, the HEAT and/or FAN function will only be activated automatically
one time.
INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
23
KEY DISPLAY