Precautions / Warnings; Important Safety Instructions; Transport - CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones

INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
3.2
• Read and understand the user manual completely before use.
• Do not use product if package is damaged.
• Do not use device without the front windows correctly attached.
• Perform temperature calibration in the intervals described in the manuals.
• Do not use this product at temperatures exceeding 30°C.
• Always use HEPA fi lter for input gas to unit.
• Never use a non K-SYSTEMS fi lter.
• Use only premixed gas (eg. 5% CO
• Make sure that the gas supply pressure is kept stable at 0.5-0.7 bar.
• The power cord is to be used for mains disconnection.
• Always connect power cord to a proper grounded outlet.
• To reduce the risk of fi re or electric shock, this equipment should not be exposed to rain or
moistures and objects fi lled with liquids.
• Always use fuses according to the manufacturer descriptions.
3.3

Important Safety Instructions

• Read this safety instruction carefully before using equipment.
• Always keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Refer all servicing to qualifi ed service personnel.
• Do not use this apparatus near water.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus
that produce heat.
• This apparatus must be connected to a grounded (3-pin) socket. If the provided plug does not fi t
into your outlet, consult and electrician for replacement of the outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the unit.
• Only use attachments/accessories specifi ed by the manufacturer.
• Use only with the cart and stand specifi ed by the manufacturer or sold with the unit.
• Unplug the unit during lightning, storms or when unused for a long period of time.
• Servicing is required according to service manual or if the unit has been damaged in any way,
such as if it has been dropped, exposed to rain or moisture, or does not operate normally.
3.4

Transport

To prevent tilting, always transport the device using a suitable carrier, even for a transport within a
building, and separate it from the stand.
Do not transport the device over large distances without transport lock and
original device packaging
CAUTION

Precautions / Warnings

in air).
2
8