Disposal Procedure - CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones

Shortcuts
Commonly used functions can be accessed directly without needing to enter the menu and navigate to
the function.
Brightness: Press the
Contrast: Press the
Input source: Press and hold the SELECT button for about 5 seconds
Service
The monitor has no user-serviceable parts. Servicing, cable connections or replacement of the monitor
should be carried out by your authorised service technician.
The glass can be cleaned with a soft cloth moistened with detergent solution or isopropyl alcohol in water.
14

DISPOSAL PROCEDURE

Cabinet devices or the whole unit contains re-usable materials. All components (with the exception of the
HEPA fi lter) can be discarded after having been cleaned and disinfected.
Note that the fi lters from this device must be discarded in accordance with the
applicable national regulations for special solid waste.
The table below contains a list of the recyclable components.
Component
Table Plate
Exterior Housing
Interior Housing
Device Back Panel
Printed Circuit Board
Front Window(s)
Light Source
Contamination Hazard!
Since this device might have been used for processing and treating infectious
CAUTION
substances, it might be contaminated. Prior to disposal, the whole device
(including light source) must be decontaminated.
INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
button
▼
button
Material
Stainless steel
Steel–painted
Aluminum–painted
Steel–painted
Enclosed electronic components mounted on a
PCB board
Polycarbonate windows, with UV protection.
Aluminum, anodized
51