General Description; Electromagnetic And Other Interferences; Features; Laminar Flow - CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones

The device is packed in a wooden crate mounted and strapped to a wooden pallet. The workstation is
also fi xed to the pallet with 2 screws in the back. For the safety of the device and making sure that the
device has been properly handled, anti-shock and anti-tilt sensors are placed on the exterior of the crate.
In case of activation of the sensors, notify and report it immediately to your transporter and your local
CooperSurgical Representative. Inspect the device accordingly for damages.
NOTE: CooperSurgical is responsible for delivery and installation of the device at user facility.
4

GENERAL DESCRIPTION

4.1

Electromagnetic and Other Interferences

All electronic devices, especially electronic equipment containing radio senders and/or receivers such
as mobile phones, computers, and antennas, give off electromagnetic emissions. This radiation is a
byproduct of electrical or magnetic activity. The emissions from such devices can interfere with other
devices, causing potential problems.
Equipment can be aff ected by electromagnetic interference from other devices in two major ways: The
fi rst is direct eff ects through proximity with other devices, and the second is electrical interference over
the power lines.
It is strongly recommended to:
• Make sure that all devices emitting electromagnetic radiation are kept a reasonable distance
away from the workstations in order to avoid any potential electromagnetic or other interferences.
• Have separate power circuits that are intended for use for medical equipment only.
5

FEATURES

5.1

Laminar Flow

The L124 and the L126 IVF Workstations are supplied with two laminar fl ow modes:
• The Normal Mode must be used when working inside or nearby the laminar fl ow hood.
• The Standby Mode maintains the workstation interior under aseptic conditions, but working inside
the workstation or near the workstation may cause changes in the airfl ow.
INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
Handling
Indicator
9
Handling
Indicator