CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones página 21

Follow these steps to navigate in the FAN (FAn) option.
ACTION
Press and hold both the UP and DOWN keys for
3 seconds to enter the menu. The menu "uSEr" will
appear in the display.
Press the SP key once, the "FAn" option appears
in the display.
Press and hold the SP key to change the values.
While holding the SP key in, press either the UP
or DOWN key to select between OFF, FAST or
SLOW.
When the required setting is activated, release the
SP key.
Press and hold both the UP and DOWN keys for
3 seconds to exit the menu.
NOTE: A dot will turn on in the right side of display, indicating that the Heat function is active.
If you are setting the fan to fast "-FA-", the fast speed for the fan will be activated at the St.St time.
If you are setting the fan to slow "-SL-", the slow speed for the fan will be activated at the St.St time.
(When the fan is set to "-FA-" or "-SL-", a dot shows in the right side of the display).
For example: If St.St is set up to 8.00 and function is set to "-FA-", the fan will automatically turn on at
8:00 AM.
INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
21
KEY DISPLAY