Operating Instructions; On" Function; To Increase The Light Intensity; To Decrease The Light Intensity - CooperSurgical K-SYSTEMS L100 Serie Manual De Instrucciones

10.2

Operating Instructions

When installed in the K-SYSTEMS Workstation, the Light Source will be connected to the workstation's
keyboard.

10.2.1 "ON" Function

Turn ON the Light Source by pressing the UP key. The light will now illuminate.

10.2.2 To Increase the Light Intensity

Hold the UP key until preferred light intensity is reached.

10.2.3 To Decrease the Light Intensity

Hold the DOWN key until preferred light intensity is reached.

10.2.4 "OFF" Function

The microscope light is switched OFF by simultaneously pressing both the UP and DOWN key.

10.2.5 Adjusting the Mirror

The knob for adjusting the mirror is placed on the left hand side of the Light Source. The rotating mirror
has two diff erent sides. One side is a plane mirror, while the other is concave.
The plane mirror is used when a high magnifi cation is needed and the concave mirror is used for when
lower magnifi cation is needed. Virtual dark fi eld is obtained by positioning the mirror almost vertically.
The mirror can be rotated 360 degrees in a rotational pattern and moved 45 mm horizontally, which
enables positioning for an optimal lighting of the object.
The LS112 can be supplied with fi lters for specifi c
light conditions:
1. No fi lter inserted (included)
2. Green fi lter
3. Red fi lter
4. Blue fi lter
INSTRUCTION MANUAL FOR K-SYSTEMS L100 SERIES WORKSTATIONS (English)
41