Mectron multipiezo Manual De Uso Y Mantenimiento página 32

multipiezo
While the writing PUMP/FLUSH is
flashing, press the pedal once and then
release it, PUMP/FLUSH will stop flashing
and the irrigation circuit will start to fill;
As soon as the peristaltic pump starts
working, the entire scale of values in the
"irrigation" section lights up, and during
the passage of the liquid, the irrigation
value switches from 6 to 0;
The cycle can be stopped as soon as liquid
is seen flowing out from the multipiezo,
handpiece by pressing PUMP/FLUSH or
alternatively by pressing on the pedal.
The PUMP function is deactivated, and
the keyboard becomes active again in the
last setting used;
Screw in the preselected insert on the
multipiezo handpiece until it comes into
contact;
24
2
perio/scaler perio/scaler
restorative restorative
3
4
5
perio/scaler perio/scaler
restorative restorative