Publicidad
Idiomas disponibles
Idiomas disponibles
DISASSEMBLING PARTS FOR CLEANING AND STERILISATION
If present, remove the insert from the
handpiece using the torque wrench;
Disconnect the handpiece from the
relative cord;
CAUTION: Do not try to unscrew or
turn the connector when disconnecting
the handpiece.
The connector can be damaged.
Unscrew the nose cone from the
handpiece;
CAUTION: The nose cone has a light
pipe. If the nose cone is unscrewed, the
light pipe will no longer be held in place
and may slide and be disconnected. Be
careful not to lose the light pipe.
NOTE: On the "Front cone for LED
handpiece" (cod. 03020158) of the
MANIPOLO ABLATORE LED (LED SCALER
HANDPIECE - cod. 03120142), the metal
ring cannot be separated from the
plastic cone.
2
3
4
29
Publicidad
