Publicidad
Idiomas disponibles
Idiomas disponibles
multipiezo
8.2
Cleaning the Non-Sterilisable Parts
The following procedure must be performed
on non-sterilisable parts of the appliance,
except for the tank and its cap. The parts in
question are:
• Machine core unit;
8.2.1
Required Materials
• Clean, soft, low-lint cloths;
8.2.2
Cleaning Method
Clean the surface of the parts in question
using a clean, dry, low-lint cloth,
dampened with a detergent solution (pH
6-9);
Dry the parts using a dry, non-abrasive,
low-lint cloth.
CAUTION: Do not sterilise the parts
in question. They may stop working
and cause damage to people and/or
property.
WARNING: Always switch off the
appliance using the O/I switch and
disconnect it from the power mains
before carrying out cleaning tasks.
38
• Pedal and relative connection cable to
the machine;
• End part of the scaler handpiece and
relative cord.
• Cleaning solution (pH 6-9).
1
2
WARNING: The device and its
parts that cannot be sterilised are not
protected against the penetration of
liquids. Do not spray liquids directly on
the surface of the device or its parts that
cannot be sterilised.
CAUTION: Do not use running water to
clean the parts in question.
CAUTION: Do not soak these parts in
liquid and/or various kinds of solutions.
Publicidad
