Publicidad
Idiomas disponibles
Idiomas disponibles
Run a number of "flush" cycles (see points
7 to 9) sufficient to completely drain the
water from the tank;
After cleaning the irrigation circuit,
disassemble the individual parts (see
Chapter 7 on page 28
clean and sterilise them (see
page 31
).
CAUTION: If the handpiece is stowed
back in its support, with the "pump/
flush" function selected
(flashing LED) but not running, the
function is deactivated;
CAUTION: During the "pump/flush"
cycle, i.e. when the function has been
selected and activated by pressing the
pedal, if the handpiece is stowed back in
the support, the cycle is not interrupted.
CLEANING AND STERILISATION
20
21
) and proceed to
Chapter 8 on
37
Publicidad
