Publicidad
Idiomas disponibles
Idiomas disponibles
multipiezo
To start the "pump/flush" function while
the writing "pump/flush" is flashing,
press the pedal once and release it:
the keyboard will stop flashing and the
cleaning cycle will start;
NOTE: The function can be stopped at
any time by pressing "pump/flush" again
or alternatively by pressing the pedal
briefly. The keyboard will be reactivated
and configured in the last setting used.
As soon as the peristaltic pump starts
working, the entire scale of values in the
"irrigation" section lights up, and during
the passage of the liquid, the irrigation
value switches from 6 to 0. The cycle lasts
20 seconds. Once ended, the keyboard
will be reactivated and configured in the
last setting used.
After cleaning the irrigation circuit, disassemble the individual parts (see
28
) and proceed to clean and sterilise them (see
7
DISASSEMBLING PARTS FOR CLEANING
AND STERILISATION
Before carrying out the cleaning procedures described in
accessories and components of the multipiezo.
WARNING: Switch the appliance off.
Always switch the appliance off using
the switch and disconnect the power
supply cable from the wall socket and
machine core unit before carrying out
cleaning and sterilisation tasks.
28
4
perio/scaler
perio/scaler
restorative
restorative
5
Chapter 8 on page 31
Chapter 8 on page 31
1
20"
Chapter 7 on page
).
, disconnect all
Publicidad
