Publicidad
ENGLISH
1.4 IDENTIFICATION
Each individual machine has an identifi cation plate (Fig. 1) indica-
ting the following details:
1) Mark and address of the Manufacturer;
2) Type and model of machine;
3) Unloaded mass, in Kilograms;
4) Mass full load, in Kilograms;
5) Registration of the machine;
6) Year of manufacture;
7) CE mark.
You are advised to note down your data on the form below, along
with the date of purchase (8) and the dealer's name (9).
8) ____________________
9) ____________________
This information must always be quoted whenever assistance or
spare parts are needed.
1.5 HANDLING
The Customer must apply the rules envisaged in the European Directives EEC 391/89 and 269/90 and subsequent modifi cations
on the possible risks for loading and unloading operators caused by manual handling of loads.
During handling operations wear suitable personal protection equipment:
When moving the machine, raise it and hook it to the special couplings (Fig. 2) using a forklift with a capacity of at least 5 tons. As this
operation is dangerous, it must be carried out by trained, responsible personnel. The machine weight is shown on the identifi cation
label (Fig. 1).
Stretch the cable to level the machine. The hooking points are shown by the graphic "hook" symbol (11, Fig. 4).
2
• Packaging materials (pallets, cartons, etc.) must be disposed of as prescribed by the existing regulations through authorised
disposal companies.
• Parts making up the machine must not be lifted by hooking them up from moving or weak parts such as guards, electrical
runways, pneumatic parts, etc.
• Standing under suspended loads is not allowed; unauthorised personnel are not allowed access to the work sites; it is
mandatory to wear overalls, safety footwear, gloves and a hardhat.
44 - EN
USE AND MAINTENANCE
ATTENTION
1
3
ATTENTION
fi g. 1
(2)
(3)
(5)
(7)
3
(1)
(4)
(6)
2
fi g. 2
cod. G19502812
Publicidad
