Threading The Upper Looper - Sears Kenmore 385.16622 Manual De Instrucciones

Threading the upper looper r -,
Place the spool of thread on the spool pin second from
the right.
Upper looper threading points are marked in red,
There is a convenient threading chart located on the
machine body behind the looper cover,
(_ Thread guide
Thread guide plate
(_ Looper thread guide
(_ Upper looper thread tension dial
(_ Upper looper thread guide 1
(_ Upper looper thread guide 2
(_ Upper Looper thread take-up lever (upper)
Upper looper thread guide 3
(_) Upper looper
[] Draw the thread through the tl_read guide second from
the right from back to front.
(_ Thread guide
if the thread slips out from the thread guide groove while
serging, pass the thread through the thread guide hole as
shown,
f
[]
! I
J
[] Pass the thread through the second set of holes in the
thread guide plate as illustrated.
(_ Thread guide plate
Pass the thread through the left side of looper thread
guide, sliding the thread from right to left.
Q Looper thread guide
f
[]
J
h
f
[]
J
3O
J