en
5.
Working with the
Acculan 3Ti Dermatome
Risk of infection and contam-
ination!
Product is delivered unsteril-
WARNING
ized!
►
Risk of injury and material
damage due to accidental
activation of the product!
WARNING
►
Risk of injury and material
damage due to inappropriate
use of tools!
WARNING
►
►
Damage to the product if
dropped!
►
WARNING
Risk of injury and/or malfunc-
tion due to unrecognized
change to cutting setting!
WARNING
The basic adjustment of the
cutting setting can change if
the product falls on the floor,
for example.
►
►
6
Sterilize the product
before use pursuant to the
operating instructions.
Products which are not
being actively used must be
secured against accidental
activation (position OFF).
Always follow the safety
advice and information
given in the instructions
for use.
When coupling/uncou-
pling, handle tools with
cutting edges with care.
Use the products only if
they are in perfect techni-
cal condition, see Function
check.
Do not use product.
Have the manufacturer
inspect the product.
Risk of burns to skin and tissue
through blunt tools or if prod-
uct has not been maintained
WARNING
properly!
►
►
►
5.1
System set-up
Connecting the accessories
Risk of injury due to unap-
proved configuration using
additional components!
DANGER
►
Combinations of accessories that are not mentioned in
the present instructions for use may only be employed
if they are specifically intended for the respective
application, and if they do not compromise the perfor-
mance and safety characteristics of the products.
►
Please address your B. Braun/Aesculap partner or
Aesculap Technical Service with any inquiries in
this respect; for a contact address, see Technical
Service.
Use tools only if they are in
perfect condition.
Replace blunt tools.
Maintain the product
properly, see maintenance
guide.
For all applied components,
ensure that their classifi-
cation matches that of the
application component
(e.g. Type BF or Type CF) of
the respective device.