B.Braun Aesculap Acculan 3Ti Instrucciones De Manejo/Descripción Técnica página 9

Installing the flap rod of the Acculan 3Ti Der-
matome
►
Attach flaps 12 on flap rod 18 down to the onset
of the rear surface. Observe the symbol on the face
of the thread.
►
Screw the nut 2 counterclockwise onto the thread
of flap rod 18 (left-handed thread).
►
Turn the nut 2 up to the edge of the visible surface.
►
Insert and twist the complete flap rod 18 in its
guide slots 19 on the side surfaces.
►
Push the flap rod 18 laterally all the way so that
the cross pin of the flap rod 18 comes to rest in the
guide slot 19.
►
Tighten nut 2 by turning it counterclockwise.
2
12
Fig. 1 Mounting the flap rod
Inserting the dermatome blade
Risk of infection and contam-
ination due to torn or cut sur-
gical gloves!
DANGER
►
Risk of injury and material
damage due to inadvertent
activation of the dermatome
DANGER
while inserting the dermatome
blade!
►
19
18 19
Avoid contact with the
cutting edge when insert-
ing the dermatome blade.
Prior to inserting the blade,
engage the safety catch.
►
Engage safety catch 5.
►
Push both clamp levers 7 in the direction of the
arrows.
Blade cover 6 is now unlocked.
►
Open blade cover 6 in the direction of the arrow.
►
Safely insert the dermatome blade 24 into the
pusher dog 10 and blade guide peg 9, see Fig. 2.
►
Close blade cover 6.
►
Cock both clamp levers 7 so that the roll pin 17
grips into the recess of the clamp lever 7.
Removing the dermatome blade
►
Release both clamp levers 7.
►
Open blade cover 6.
►
Remove the dermatome blade 24 from the pusher
dog 10 and blade guide peg 9, see Fig. 2.
24
9
Fig. 2 Safe insertion and removal of the dermatome
blade
en
6
7
7