Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
NSTRUCTIONS AND WARNINGS FOR REPLACING PARTS
WARNING: Before carrying out any replacement procedure, activate all the safety devices
provided and decide whether staff at work and those in the vicinity should be informed .
In particular, turn off the water supply taps, cut off the electricity supply to the appliance using
the master switch and prevent access to all devices which might cause unexpected health and
safety hazards if turned on .
WARNING: If worn parts have to be replaced, use original spare parts only .
WARNING: The manufacturer declines all responsibly for injury or damage to components
due to the use of non original parts, or extraordinary work on the appliance which may modify
the safety requirements without the manufacturer's authorisation . When ordering components,
follow the instructions provided in the parts catalogue .
WARNING: Replacement operations must be carried out by authorised, qualified staff, in
accordance with the relevant legal requirements .
To carry out this operation, proceed as follows.
1) Undo the screws to remove the side panel (A).
2) Open the fuse-holder (B) and replace the dama-
ged fuse (C) .
3) Replace the fuse-holder and the side panel when
the operation is complete.
To carry out this operation, proceed as follows.
1) Undo the screws and remove the lamp cover (A).
2) Extract and replace the lamp (B).
WARNING: During the procedure, take
care not to touch the lamp directly; wear protecti-
ve gloves if necessary .
3) Replace the lamp cover (A) and retighten the
screws when the operation is complete.
14
REPLACING PARTS
REPLACING THE FUSE
CHANGING THE LAMP
C
A
B
A
B
REPLACING PARTS
3326461_GB_inst_rev.1
Publicidad
