Descargar Imprimir esta página

Angelo Po BX61E Manual De Uso página 35

Horno mixto
Ocultar thumbs Ver también para BX61E:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

SAFETY
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by live
components
Risk of electric
shock caused by live
parts
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for the coun-
termeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by live
components
3326461_GB_rev.1
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on the
adjacent metal accessories
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualified
staff only, in accordance with
the relevant applicable laws.
• Specialist procedure
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" of the installation
manual.
• Disable the power supply
before removing the protec-
tions
• Prevent the appliance from
being powered accidentally.
• Ensure that there is no voltage
• Before commissioning the
appliance, check that all
electric connections are not
damaged
• Use a power supply cable
with the specifications indi-
cated in section "Electrical
connection" of the installa-
tion manual.
• Before appliance commis-
sioning, check that electri-
cal connections are securely
fixed
• Before commissioning, make
sure that the appliance and
its metal accessories are con-
nected to a system for equi-
potential bonding
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualified
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no volt-
age
ENGLISH
Safety device
• Protection
panels
• System switch-
disconnector
Equipotential
bonding system
Safety device
• Protection pan-
els
• System
switch-
disconnector
7

Publicidad

loading

Este manual también es adecuado para:

Bx61erBx101eBx101erBx82eBx122e