Audi 8V0.055.204.A Instrucciones De Instalación página 104

Installation instructions - Audi A3 2013 ► Audi A3 2014 ► Electrics set for removable tow-
ing bracket, scope of delivery 8V0.055.204.A Audi Genuine Accessories
5.24.2 Removing the lower left-hand section of
the A-pillar trim, A3 Sportback
– Remove the side dash panel cover
– Remove the gap cover on the A-pillar
Left-hand drive vehicles
– Remove the bonnet actuating lever
– Unscrew the screw -2-.
Continue for all vehicles
– Starting from the back, unclip the lower section of the A-pillar
trim -3- from the side member using the removal wedge
-3409- -arrows A and B- and pull it back -arrow C-.
– Uncouple the lower section of the A-pillar trim at the bolt -1-
from the A-pillar and remove.
Notes on installation
Installation is carried out in reverse order. Please note the fol-
lowing points:
Tightening torque: 2.5 Nm
5.25 Removing the upper left-hand section
of the B-pillar trim, A3, A3 Sportback
⇒ " Removing the upper left-hand section of the B-pillar
trim, A3" on page 35
⇒ " Removing the upper left-hand section of the B-pillar
trim, A3 Sportback" on page 36
5.25.1 Removing the upper left-hand section of
the B-pillar trim, A3
WARNING
Observe the relevant safety regulations
⇒ P age
29.
⇒ P age
31.
⇒ P age
32.
⇒ P age
2.
Edition 03/2014
5 Preparations
35