Audi 8V0.055.204.A Instrucciones De Instalación página 72

Installation instructions - Audi A3 2013 ► Audi A3 2014 ► Electrics set for removable tow-
ing bracket, scope of delivery 8V0.055.204.A Audi Genuine Accessories
◆ Pyrotechnic components must be installed immediately after
they are removed from the transport container.
◆ If work is interrupted, the pyrotechnic component must be re-
turned to the transport container.
◆ Pyrotechnic components must not be left unattended.
◆ When connecting the pyrotechnic components in the re-
straint system, only the person performing the work may be
inside the vehicle.
◆ Pyrotechnic components must not be treated with grease,
cleaning agents or similar products.
◆ If the fabric becomes contaminated with substances such as
oil, grease, paint, colour or solvents, the airbag unit must be
replaced.
◆ In addition, pyrotechnic components must not be exposed to
temperatures above 100°C, even for short periods.
2.2 Storing, transporting and disposing of
airbag, belt tensioner and battery dis-
connector units (pyrotechnic compo-
nents)
◆ Storage is subject to the applicable national legislation.
◆ Transportation is subject to national and international laws
governing packaging, naming, labelling and accompanying
documentation.
◆ Pyrotechnic components that have not been ignited must be
returned in the original packaging for appropriate recycling in
line with the applicable national legislation. Contact your im-
porter if you have any questions.
◆ Only pyrotechnic components that have been completely ig-
nited may be disposed of as industrial waste.
WARNING
This does not apply to belt tensioners that work accord-
ing to the Wankel tensioner principle. Tensioners of this
kind should be handled in the same way as pyrotechnic
components that have not been ignited (e.g. airbags).
Background: For belt tensioners that work according to
the Wankel tensioner principle, it is not possible to use
workshop tools to check whether all ignition stages have
completed.
2 Safety instructions for pyrotechnical, electrical and mechanical components of the restraint system
Edition 03/2014
3