Descargar Imprimir esta página

Audi 8V0.055.204.A Instrucciones De Instalación página 111

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 326
Installation instructions - Audi A3 2013 ► Audi A3 2014 ► Electrics set for removable tow-
ing bracket, scope of delivery 8V0.055.204.A Audi Genuine Accessories
Edition 03/2014
– Remove the expanding clip -1-.
– Unclip the wheel housing trim -2- from the side member us-
ing the removal wedge -3409-, starting at the front -arrow A-.
– Fold the rear seat backrest forward.
– Unclip the wheel housing trim -2- from the side panel using
the removal lever -80 - 200- -arrows B, C and D-.
– Pull the wheel housing trim downwards out of the belt guide
and pull out the C-pillar-trim.
Notes on installation
Installation is carried out in reverse order. Please note the fol-
lowing points:
Note
◆ If the clips for the trim remain in the mounting points in the
body, remove these clips and insert into the trim.
◆ Check the clips for damage or deformation and replace as
necessary.
5.31 Removing the left-hand side of the back
panel trim, A3 Cabriolet
– Remove the front of the back panel trim
– Remove the left-hand side trim
– Remove the front luggage compartment trim
– Remove expanding clip -2- using the removal lever
-80 - 200-.
The expanding clips -1- have already been removed.
– Pull the side of the back panel trim -3- inwards -arrows- and
remove by pulling forwards.
5.32 Removing the front left-hand knee air-
bag, left-hand drive vehicles
The knee airbag obstructs access for work on the relay and
fuse carrier. The knee airbag is not removed completely, just
unscrewed.
42
5 Preparations
⇒  P age
38.
⇒  P age
39.
⇒  P age
25.

Publicidad

loading