EMAK TN 4500 Manual De Uso Y Mantenimiento página 31

and manufacturer's liability, leaving the
user liable for costs deriving from
damage or injury to the user or to
others.
The following are also considered prohibited
uses:
- Drive the machine from inside of the
transport box.
- Allows operators to work standing on the
load box support surface and use it as a
support point for ladders or other work
equipment.
- Carrying persons or animals.
- Use the machine to break down walls, poles,
fences, etc..
- Use the machine to crush and/or compact
leaves, trash, containers, bulk material, etc..
The sudden collapse of the crushed material
can unbalance the machine.
- Use counterweights (the manufacturer does
not provide them), or persons, in order to
compensate for excessive or unbalanced
load.
- Transport fuels, without the aid of special and
certified security containers.
- Transpor t corrosive chemical, toxic or
dangerous materials, sewage and burning
material.
- Work with the machine without the safety
systems.
- Connect to the machine equipment not
provided by the manufacturer.
- Use the machine with one hand. Use with
one hand can cause serious injury to the
operator, to assistants, bystanders or any
combination of such persons. The machine is
designed to be used with both hands.
Precautions for use of the machine
WARNING:
- Do not tamper with or remove the safety
devices fitted on the machine. REMEMBER
THAT THE USER IS ALWAYS RESPONSIBLE
FOR DAMAGE AND INJURY CAUSED TO
OTHERS.
- If you encounter a situation where you are
uncertain how to proceed you should ask
an expert. Contact your dealer or an
Authorised Service Centre. Avoid all usage
which you .consider to be beyond your
capability.
- Do not use the machine unless you are
able to call for help in the event of an
accident.
- The machine must under no circumstances
be driven on, or even across, public
roadways.
- Never use the machine to tow or push
other objects. Stability of the machine is
affected.
- During the unloading with dump box, the
center of gravity changes continuously
and consequently the stability of the
machine. Pay particular attention to cases
in which the load is pasted to the transport
box, for example with wet clay, icy material
or asphalt.
- Do not allow the load to protrude from the
transport box; protruding material can hit
other objects and can be thrown from the
transport box.
- Contact with electrical wires or cables can
cause serious injury or death due to
e l e c t r i c a l c u r re nt. Th i s u n i t i s n o t
disconnected.
WARNING - The lateral stability of the
machine DECREASES:
- The more the load is high.
- The more the load is higher related to the
bed (Fig. 3).
- The more the load is shifted with respect
to the centerline of the machine (Fig. 4).
WARNING - When the load increases the
tendency of the machine is to tip over
towards the front:
- Going downhill with a heavy load, do not
use the maximum speed.
- Do not brake suddenly.
- Operate the machine only in daylight or well-
lit conditions.
- Take great care when changing direction,
especially when working on slopes.
- Slow down the engine before switching it off.
- Check the surrounding area for possible
I
GB
F
D
E
NL
P
H
SK
CZ
RUS
UK
PL
FIN
BIH
SRB
HR
27