Maintenance (All Information Required To Keep The Machine At Peak Efficiency) - EMAK TN 4500 Manual De Uso Y Mantenimiento

Transporting
I
WARNING: The machine must not be
driven on a public road.
GB
- To transport the machine, use a suitable
motor vehicle of adequate power and size or
an approved trailer.
F
- When loading the machine onto the vehicle,
always choose a level area that is away from
traffic and free from potentially hazardous
D
objects.
- The machine is heavy and may cause serious
damage or injury from crushing. Use extreme
E
caution when loading and unloading it from
vehicles or trailers.
- Always use certified loading ramps that are 4
NL
times longer than the height of the vehicle's
load body, of adequate width, with a non-slip
surface and of solid construction to support
P
the machine's weight.
- The machine can also be strapped to a pallet
and loaded using a forklift truck. In this case
H
the forklift truck must be driven by an
authorised operator.
SK
WARNING: The machine MUST NOT be
lifted using belts, chains or hooks.
CZ
- Load the machine, setting the gear lever to
position F or F1 to load and to position R or
RUS
R1 to unload. Also set the throttle lever to the
UK
"SLOW" position (D, Fig. 13) to move the
machine slowly.
- The machine must be transported in a
PL
horizontal position, with the tank empty, the
f uel s top - coc k c l osed, also en su r in g
compliance with applicable transpor t
FIN
regulations for such machines.
- Strap the machine to the vehicle or trailer
BIH
using approved tension straps, ensuring that
SRB
HR
it is correctly and securely fastened.
WARNING: The parking brake alone
does not guarantee the stability of the
machine during transport.
34
- During transport, no-one must remain seated
on the machine.
- Before transporting the machine on public
roads, refer to and adhere to applicable local
highway regulations.
- Do not try to load/unload the machine to/
from the means of transport while the
transport box of the machine contains a load.
- Do not allow anyone to stand in front of the
machine while it is loaded/unloaded to/from
a means of transport.
- When getting on or off a ramp, keep the
c raw l e r s i n t h e ce nte r o f t h e ra m p s
themselves.
- When getting on or off the ramps, do not try
to change direction.
- The center of balance of the machine will
change suddenly passing over the seam
between the ramps and the bed of the
transport vehicle. Be prepared for this sudden
change.
7. MAINTENANCE
Before carrying out maintenance, also
carefully read the engine manual.
EMISSIONS COMPLIANCE
This engine, including the emissions control
system, must be operated, used and maintained
in accordance with the instructions provided in
the user's manual in order to maintain the
emissions per formance within the legal
requirements applicable to non-road mobile
machinery.
No deliberate tampering with or misuse of the
engine emissions control system has to take
place.
Incorrect operation, use or maintenance of the
engine or of the non-road mobile machinery
could result in possible malfunctions of the
emissions control system to a point where the
legal requirements applicable are not respected ;
in such case a prompt action must be taken in
order to rectify the system's malfunctions and
restore the applicable requirements.