Put The Allen Advance Table In Atrendelenburg Position - Hillrom Allen A-71101 Manual Del Usuario

Instructions for Use
PUT THE ALLEN ADVANCE TABLE IN A
TRENDELENBURG POSITION
WARNING:
Before you adjust the Allen Advance Table or use the tilt
feature, make sure that the brakes are locked, the patient is
secured to the support top and is fully prepared for the
movement, and the Allen Advance Table is free of objects
that could interfere with the adjustment. Otherwise, patient
fall, injury, or equipment damage could occur.
Make sure that—
•
The brakes are locked (the locked indicator on the
Allen Advance Table display is green).
•
The patient is secured to the support top and is fully prepared for
the adjustment.
NOTE:
We recommend that you use the two large security straps to secure the
patient to the support top.
•
The Allen Advance Table is free of objects that could interfere
with adjustment.
WARNING:
Observe lines closely during articulations. To do so could
cause patient fall, injury, or equipment damage.
Press and hold the applicable Trendelenburg or
Reverse Trendelenburg control until the
support top is at the correct angle.
To return to the horizontal position, press and hold the opposite
Trendelenburg control until the lowered column is at the same height as
the raised column.
NOTE:
Near the bottom on the outside of the
columns, there are numbers to help identify
the height level.
32 Allen® Advance Table User Manual (D-720761 Ver D)