Pre-Use Check - Hillrom Allen A-71101 Manual Del Usuario

Instructions for Use
NOTE:
Allen® Support Pads are designed to work with Allen® Ultra
Comfort™ Covers only.
Head Plate
Put the head plate in position on the
Rail Top at a location to support the
patient's head.
Attach the Velcro® straps to hold the
head plate in position.
Install the foam head block on to the
head plate.
NOTE:
The Allen® Head Plate is designed to work with the Allen® Foam
Head Block only.

PRE-USE CHECK

Before each use of the Allen Advance Table, make sure all necessary
accessories are attached and the Allen Advance Table is ready for use. If
any of the controls or indicators do not operate correctly, do not use the
Allen Advance Table. Contact Allen Medical or your local distributor.
Condition
The Allen Advance Table power
cord is connected to the Allen
Advance Table and to an applicable
power outlet.
The On/Off switch is on.
The brakes are locked.
The Allen Advance Table is in
pendant mode.
The columns are level (at the same
height).
The support top is horizontal (not
tilted).
30
The Power indicator is on.
The battery charge level indicator
is on.
The locked indicator is green; the
unlocked indicator is off.
The pendant control indicator is
green; the manual flip indicator is
off.
Near the bottom on the outside of
the columns, there are numbers to
help identify the height level.
The tilt level indicator is green; the
tilt indicator is in the center of the
tilt indicator area.
Allen® Advance Table User Manual (D-720761 Ver D)
Associated Indicator(s)