Remove A Support Top And/Or Bracket; Install The Prone Support Set (A-71300) On The Rail Top - Hillrom Allen A-71101 Manual Del Usuario

c. Make sure the drop lock on the end of the cross pin moves to the
side to hold the support top in position.

Remove a Support Top and/or Bracket

WARNING:
If there is a patient on the support top, do not remove the
cross pin from the support top. Patient fall or injury could
occur.
Make sure the patient has been moved from the support top.
Do the applicable steps of the install procedure in reverse order.
NOTE:
To remove a cross pin, align the drop lock with the pin, and hold the
lock in as you remove the cross pin from the H-bracket.
NOTE:
When the H-brackets and cross pins are not in
use, they can be stored on the inside of the
columns.
INSTALL THE PRONE SUPPORT SET (A-71300) ON
THE RAIL TOP
The Prone Support Set includes one chest support, six hip supports (two
each of small, medium, and large), two thigh supports, one sling, and one
head plate.
Sling
WARNING:
The sling is intended to provide a support for the patient's
legs. We recommend that you use additional pressure
reducing material between the patient's legs and the sling to
help prevent patient injury.
Allen® Advance Table User Manual (D-720761 Ver D)
Instructions for Use
27