Care, Maintenance, Inspection And Storage - MSA DSL Serie Manual De Instrucciones

Care, Maintenance, Inspection and Storage

9. Care, Maintenance, Inspection and Storage
This product should be regularly inspected and maintained by specialised personnel.
An inspection and maintenance log must be maintained. Always use original MSA parts.
The following table lists the recommended intervals for care, maintenance and inspection (as defined in BGR
/GUV-R 190 for the Federal Republic of Germany).
Equipment
DSL or MASS
Lung Governed
Demand Valve
Facepiece
Pressure
reducer
ASV
GB
Compressed
air cylinders
and valves
1)
By manufacturer only
Rubber parts are subject to ageing and must be checked at regular intervals and replaced if necessary,
depending on the local conditions.
Compressed air supply hoses must be checked at regular intervals and replaced if necessary, depending on the
local conditions.
22
MSA recommends the following maintenance intervals. Depending on the conditions of use, it may
be necessary to carry out the listed tasks at shorter intervals.
Observe national laws and regulations!
If you have any queries, please contact your nearest MSA agent.
Type of work to
See chapter
be carried out
Cleaning
Visual
inspection,
8.4.1, 8.4.2
function and
and 9.2
air-tightness
check
Check by
wearer of the
apparatus
 see operating manuals for lung governed demand valve
 see operating manuals for full face mask
General
overhaul
Check
switching
points
Function check
and air-
tightness check
Short
inspection
General
overhaul
Check filling
pressure
Inspection by
expert
Before
After use
use
9.5 X
X
X
9.1.3
9.4.1 X
8.4.2 X
X
-see operating manual for compressed air cylinder
Inspection interval according to industrial safety
regulations (BetrSichV)
DSL Series
Semi- Every 6
Annually
annually years
X
X
1)
X
X
X
X