Refill" Function - Mectron combi touch Manual De Uso Y Mantenimiento

combi touch
Press the pedal to start treatment. The
flow of water can be regulated via the
right hand knob until the desired amount
is reached.
At the end of the treatment, put the
polisher handpiece back in its seat.
5.6.1 "Refill" function
The "refill" function allows the powder
containers to be depressurised, enabling their
opening or removal and preventing powder
from escaping. This function must be used
whenever a container is to be reloaded or
cleaned.
To activate the "refill" function, proceed as follows:
38
6
7
NOTE: The powder containers are only
pressurised when, after being selected, the
pedal is pressed.
CAUTION: During the "refill" cycle, air and
powder escape from the polisher handpiece.
refill
refill