Mectron combi touch Manual De Uso Y Mantenimiento página 228

combi touch
Gently brush the surface of the air-
polishing handpiece again using the
brush with soft nylon bristles;
Rinse the air-polishing handpiece under
hot running water (40 °C ±5 °C) for about
10 minutes, moving it slightly to allow the
water to reach the entire surface;
Place the air-polishing handpiece in the
ultrasonic tank immersed in demineral-
ised water for at least 10 minutes at 40°C
±2°C;
After 10 minutes of immersion in the
ultrasonic tank with demineralised water,
rinse the internal channels of the air-
polishing handpiece by injecting 20 ml of
deionised water at ambient temperature
(20°C – 25°C) using a syringe with needle,
five times in a row.
Process validated by independent bodies with enzymatic detergent.
88
33
34
35
36
x5
H₂O
H₂O