Mectron combi touch Manual De Uso Y Mantenimiento página 216

combi touch
Clean the external and internal surfaces
of the tank and cap with a clean, soft,
low-lint cloth, dampened with a mild
detergent solution (pH 6-9);
Thoroughly rinse the inside and outside
of the tank and cap under running water
to eliminate all residue of the detergent
solution;
Remove any residue on the external or
internal surfaces of the tank and cap
using a soft, low-lint cloth, dampened
with demineralised water;
When cleaning operations are over,
check the pieces under an appropriate
light source, paying attention to any
soil residue and, if necessary, repeat the
cleaning cycle.
76
2
3
4
5