Mectron combi touch Manual De Uso Y Mantenimiento página 181

Place the scaler handpiece, with or
without insert, over a container to catch
the liquid released during the rinse cycle;
To enter "flush" mode, select "flush" on
the touch keyboard.
The previously selected irrigation type
will remain active and the corresponding
LED will flash (faded out).
All the other selectable options on the
keyboard will be disabled.
NOTE: The "flush" mode can be
deactivated at any time by pressing the
"flush" key again. The keyboard will be
reactivated and configured in the last
setting used.
The irrigation circuit used to carry out the
"flush" cycle can be changed by pressing
the key showing a tap and tank;
FLUSH FUNCTION
4
5
6
refill
refill
41