Mectron combi touch Manual De Uso Y Mantenimiento página 211

Press the pedal once and release it to
start the cycle.
The function and selected irrigation
type LEDs will flash. A sequence of short
acoustic signals indicates that the cycle is
running;
NOTA: the function can be interrupted
at any time by briefly pressing the pedal.
The keyboard will be reactivated and
configured in the last setting used.
The cycle lasts 23 seconds. Once ended,
the keyboard will be reactivated and
configured in the last setting used;
Repeat the "flush" cycle (see points 7 to
10 of the procedure) a second time;
At the end of the "flush" cycles, wait 12
minutes;
Repeat the "flush" cycle (see points 7 to
10 of the procedure) 3 times;
CLEANING AND STERILISATION
9
10
23 sec.
11
12
13
refill
refill
71