Mectron combi touch Manual De Uso Y Mantenimiento página 166

combi touch
The position of the LED light on the nose
cone of the "MANIPOLO ABLATORE LED
COMBI TOUCH" ("COMBI TOUCH LED
SCALER HANDPIECE" cod. 03120224) can
be adjusted as follows:
1. Hold the handpiece body and
slightly unscrew the metal ring
at the base of the nose cone by
turning it counter-clockwise;
2. Rotate the nose cone so that the
LED light is in the desired and
necessary position;
3. To fix the position, screw the metal
ring in a clockwise direction.
IRRIGATION
(Ref. 5 inside cover)
The appliance, for the scaler part, allows
the use of two types of irrigation:
• the normal water circuit or
• the tank circuit.
The flow rate of the two circuits can be
regulated as follows:
• for the normal water circuit, the
flow can be continuously regulated
using the left-hand knob;
• for the tank circuit, the flow can be
continuously regulated on 7 levels
via touch screen using the "–" and
"+" keys.
26
refill
refill