Mectron combi touch Manual De Uso Y Mantenimiento página 235

CAUTION: Before starting the
sterilisation cycle, make sure that the air-
polishing handpiece is thoroughly dry
both internally and externally.
To do so, blow compressed air both
externally and through the internal
through-holes. This will prevent the
appearance of stains, streaks on the
surface, or oxidation inside the air-
polishing handpiece.
Dry the inserts tightening wrench using a
soft, low-lint cloth;
Lubricate the inserts tightening wrench
with medical-grade lubricants in the
indicated point.
CAUTION: Do not use oil or silicone-
based lubricants.
Dry the K9 wrench using a soft, low-lint
cloth.
CLEANING AND STERILISATION
3
4
5
6
95