Mectron combi touch Manual De Uso Y Mantenimiento página 156

combi touch
Item
Front cone for LED handpiece
PROPHY powder container
PERIO powder container
Powder container cap
Light guide kit
Table 4 – Accessories available for separate order.
b) Produced by Mectron.
c) Distributed by Mectron.
The packaging of the appliance cannot
undergo strong impacts as contains electronic
components, therefore the transport and the
storage must be carried out with particular
care.
Do not stack various boxes in order to avoid
pinching the underlying packaging.
All the material sent by MECTRON was
controlled at the time of dispatch.
The appliance is shipped
protected and packaged.
Upon receipt of the appliance, check for any
possible damage caused during transport and
16
Accessories available for separate order
Code
Front
ABLATORE LED COMBI TOUCH
03020205
(COMBI TOUCH LED SCALER
HANDPIECE)
03020194 Container only, without cap
03020200 Container only, without cap
03020195
b)
Front cone, light guide and
02900146 decorative ring for SLIM scaler
handpiece
appropriately
Description
cone for MANIPOLO
b)
b)
d) To be used only for ME type inserts.
e) To be used only for the "Crown Preparation" kit.
in case any damage and/or defects is found,
complain to the transporter.
Keep the packaging in case any items need to
be sent to an Authorised MECTRON Service
Centre and to store the appliance during long
periods of non-use.
WARNING: Before starting the treatment,
always make sure to have a stock of material
(scaler handpiece, inserts, wrenches, air-
polishing handpieces, SUBGINGIVAL PERIO
TIPS) to use in the event of failures or
drawbacks.
Ref.
L2
U1
b)
U2
b)
V
X