Mectron combi touch Manual De Uso Y Mantenimiento página 221

Place the scaler handpiece, nose cone,
and light pipe in the ultrasonic tank
immersed in demineralised water at
40 °C ±5 °C and run a cycle for at least
10 minutes;
Rinse the inner channel of the scaler
handpiece using a 20
previously filled with demineralised
water. Repeat five times;
Dry the surface of the scaler handpiece,
nose cone, and light pipe with a clean,
non-abrasive, low-lint cloth.
Process validated by independent bodies with enzymatic detergent.
CLEANING AND STERILISATION
9
10
ml syringe
11
x5
H₂O
H₂O
81