Beurer Antelope Corefit II Instrucciones De Uso página 20

11. DISPOSAL
For environmental reasons, do not dispose of the
device in household waste at the end of
its service life. Dispose of the device at a
suitable local collection or recycling point
in your country. Observe the local regula-
tions for material disposal. Dispose of the device
in accordance with EC Directive Waste Electrical
and Electronic Equipment (WEEE). If you have any
questions, please contact the local authorities re-
sponsible for waste disposal.
The empty, completely flat batteries must be dis-
posed of at specially designated collection boxes,
recycling points, or electronics retailers. You are
legally required to dispose of the batteries.
The codes below are printed on batteries contain-
ing harmful substances:
Pb = battery contains lead
Cd = battery contains cadmium
Hg = battery contains mercury
12. TECHNICAL
SPECIFICATIONS
Type Antelope Corefit II
Output Symmetrical, two-phase rectan-
waveform gular form
Output Max. 70 V pp ±10% (500 ohm)
voltage
Output Max. 140 mA pp ±10%
current (500 ohm)
Pulse 5-85 Hz ±10%
frequency
Pulse length 250-400 μs ±10%
Voltage 3 x 1.5 V AAA (type LR 03)
supply
Application 20 – 30 minutes
time
Intensity Adjustable from 0 to 40
Electrode size Approx. 11 x 12 cm
Weight ~ 350 g (without batteries or
without extension)
batteries
Belt size Approx. 75 to approx. 130 cm
for a waist
circumference
of:
Operating 10°C to +40°C,
conditions 20-65% relative humidity
Storage 0°C to +55°C,
conditions 10-90% relative humidity
If the device is not used according to the
specifications, it may not work correctly!
We reserve the right to make technical
changes to improve and develop the prod-
uct.
13. GUARANTEE
More information on the guarantee and guar-
antee conditions can be found in the guarantee
leaflet supplied.
20