Removal; Disassembly - Yamaha 20C Manual De Servicio

LOWR
REMOVAL/DISASSEMBLY
I30003-0*

REMOVAL

1) Remove the nut and washer, and remove the
propeller and spacer from the propeller shaft.
2) Drain the gear oil by removing the plugs from
the oil-filling hole and the oil-level hole.
Be sure to remove the oil filling plug first.
Referring page 3-8.
3) Set the shift lever into reverse position.
4) Tilt up the lower unit, and lock it with the tilt lock
lever.
5) Remove the shift rod.
6) Remove the bolts.
I40010-0

DISASSEMBLY

1) Referring to the exploded diagram, disassem-
ble the lower unit.
1. Water pump housing
2. Impeller and impeller key
3. Oil seal
4. Shift-rod bracket
5. Shift-rod
6-2
E