Cleaning And Inspection - Yamaha 20C Manual De Servicio

FUEL
FUEL SYSTEM
E21010-0

CLEANING AND INSPECTION

Fuel Tank
1) Add a small quantity of a suitable cleaning sol-
vent into the fuel tank and thoroughly clean the
tank interior by shaking the tank.
2) Drain off the cleaning solvent completely.
E21020-0
Fuel meter complete
1) Using a soft brush and solvent, clean the strain-
er on the end of the suction pipe, and blow-dry
it with compressed air.
2) Visually inspect the strainer for damage, and
replace the fuel meter complete if required.
3) Inspect the fuel meter components for cracks,
and replace the fuel meter complete if required.
4) Re-install the fuel meter complete with the rub-
ber gasket to the fuel tank, ensuring that there
are no leaks between the fuel meter and the
fuel tank.
1 Fuel meter assembly
2 Suction pipe
3 Fuel strainer
4-3
E