PRIXTON POWER FLEX Manual De Instrucciones página 12

EN
Instructions
Power operation cautions
Press the power switch at the top of the machine and hold 1 second to turn it on and start
working.(Power light on) Press the power switch at the top of the machine and hold 1
second again to turn it off.(Power light off)Press the heat switch on the top of the machine
to turn it on and start the device (key indicator light on). Press the heat switch at the top of
the machine again to turn off the device (key indicator off).
Device
Equipment Power switch on,quick press the power bottom once to adjust it to level 1,press
twice to adjust it to level 2, and so on,a total of 6 adjustable,display 6 levels.Level 1-6
corresponding frequency levels.Heating button,press once to level 1,and press level 2,and
level 3.When the heat working,the temperature of the three gears are 40 degrees, 50
degrees, 60 degrees, the heating time to 40 degrees is about 2 minutes.
Charging
Before the first use,charging 4h to fill it up,charging the device does not work, the power is
devided into 4 levels. The battery can be charged at any time and at any charge level.It is
not recommended that the battery be completely depleted.Make sure the power is off
when the machine is not in use.The operating time of the device depends on the speed
level and the pressure applied during use.
Speed display
Power indicator
Charging port
Heating button
ON/OFF
Rechargable
lithium battery
12
Heat Blocks