KIKKA BOO BELOVED Instrucciones De Uso página 6

IMPORTANT! KEEP FOR FUTURE REFERENCE!
EN
READ CAREFULLY!
WARNING!
1. Never leave the child unattended.
2. This product is suitable from birth to weight of the child up to 22 kg or 4 years, whichever comes first.
3. Ensure that all the locking devices are engaged before use.
4. To avoid injury ensure that the child is kept away when unfolding and folding this product.
5. Do not let the child play with this product.
6. Use a harness as soon as the child can sit unaided.
7. Always use the restraint system.
8. Check that pram body or seat unit or car seat attachment devices are correctly engaged before use.
9. This product is not suitable for running or skating.
10. This product is designed to be used from baby's birth. You shall use the most reclined position for new born babies. The newborn child is not able to sit and hold his/ her head up
unassisted. Therefore do not fix the backrest in sitting position for children under 6 months.
11. No additional mattress/ cushion shall be added.
12. When using the car seat: the car seats is not mean to replace a cot or a bed. If your child need to sleep, you need to place them in a suitable pram body, cot or bed. WARNING Only
spare parts delivered or recommended by the manufacturer/ distributor can be used.
13. Keep all plastic package away from children to avoid risk of suffocation.
• Parking device shall be engaged when placing and removing the children.
• The shopping basket can take a maximum load of 2 kg.
• Any load attached to the handle and/ or on the back of the backrest and/ or the sides of the vehicle will affect the stability of the vehicle. Maximum load of the accessory bag 1 kg. Do
not hang any additional bags.
• Regularly check for loose parts. Make routine inspection, regularly maintain, clean and/ or wash the vehicle.
• The vehicle shall be used only for one child.
• Accessories which are not approved by the manufacturer shall not be used.
• Make sure that the safety belts are placed properly.
• Only spare parts delivered or recommended by the manufacturer/ distributor shall be used.
ASSEMBLING
1. OPENING THE CARRYCOT
Press the locking mechanism that is on the side of the chasis, then take the seat handle and push upwards so that it starts unfolding, push the back frame until you hear a "click" sound
indicating that it is fully strained. (Photos 2-4)
2. ASSEMBLING THE FRONT WHEELS
Insert the shaft of the front wheel in the hole of the plastic opening of the chasis. Be careful to make sure they fit together, then push towards until you hear a "click" sound indicating
that the mechanism is closed. Repeat the action with the other wheel. In order to remove the wheels press the side levers and push the wheel downwards. (Photos 5-6)
3. ASSEMBLING THE REAR WHEELS
Insert the shaft of the rear wheel in the hole of the plastic opening of the chasis, push towards the inside until you hear a "click" sound indicating that the machanism is closed. In order
to remove the wheels press the unlocking button and pull out the wheel. (Photos 7-8)
4. INSTALLING THE BASKET
Align the openings of the central part of the basket with the central part of the frame of the chasis. Bring the openings together and push downwards until you hear a "click" sound
indicating they fit properly. In order to take out the basket press the clips on the central part of the basket and pull upwards.
WARNING!:
The basket can be used in both forward and backward facing positions. (Photos 9-11)
5. ASSEMBLING THE FRONT BUMPER
Insert the plastic terminals of the front protector into the holes of the central node of the seat, press them inwards until you hear a "click" sound that will indicate that they have been
secured. To remove the front shield, press the release button and pull out one side of the shield and then repeat the operation to remove the other side. (Photos 12-13)
6. ADJUSTING THE BASKET (PHOTO 14-16)
7. POSITIONING THE BACKREST
Press simultaneously the side buttons of the backrest, then pull upwards or push downwards in order to obtain the desired position. (Photos 17-19)
8. OPERATING WITH THE REAR BRAKES
Press the lower part of the brake pedal located in the center of the rear axle, a "click" sound will be heard to indicate that it has been activated. To deactivate the brake, push the brake
pedal up. (Photos 20-21)
9. ADJUSTING THE HANDLE
Press simultaneously the side buttons of the handle, then pull upwards or push downwards in order to obtain the desired position. (Photos 22)
10. ACTIVATING THE FRONT WHEELS BLOCKING MECHANISM
When driving on uneven or bumpy roads, pull up the locking mechanism to lock the front wheels (this way they will not be able to turn sideways making driving easier) To release the
wheels, push down on the anti-rotation cams. (Photos 23-24)
11. ADJUSTING THE CANOPY (PHOTO 25)
12. SECURITY HARNESS ( 5 POSITIONS )
Take one of the superior clasps, then put it into the central budding clasp and then push it towards the inside until you hear a "click" sound indicating it fits properly. Then repeat it with
the other superior clasp. (Photo 26-28)
13. LOOSENING THE HARNESS
ENGLISH
IMPORTANT! KEEP FOR FUTURE REFERENCE!
EN
READ CAREFULLY!
Push the button that is positioned in the inferior part of the central budding clasp, then take out the belts. In order to adjust the belts slide the plastic rings on each side of the clasps
either upwards or downwards until you obtain the wanted position.
WARNING!:
Always use the car seat in an inclined position (more thаn 150°). Make sure that the inferior part of the belt is placed between the legs. Аdjust the seat belts and pull up
the belt pad. Please follow these instructions, otherwise the kid can slip down and suffocate with the belts.
14. SECURING THE HARNESS
Align the superior clasps, then put them together into the central budding clasp and then push them towards the inside until you hear a "click" sound indicating they fit properly.
(Photos 29-30)
15. ADJUSTING THE SEATBELTS
In order to adjust the seatbelts, push lever that is positioned below the canopy, pull the superior part of the seatbelts that covers the shoulders in order to obtain the wanted position.
In order to change the position of the seatbelts, pull the belt that comes out of the front side of the seat. (Photos 31-32)
16. POSITIONING THE HANDLE
Press simultaneously the buttons that are positioned on the both sides of the seat handle, then twist the seat handle backwards until you hear a "click" sound that will indicate it fits
properly. In order to reverse the seat handle press simultaneously the buttons that are on the both sides of the handle and twist the handle forward. (Photos 33-34)
17. FOLDING THE STROLLER (PHOTOS 34- 36)
18. INSTALLING THE CANOPY OF THE CAR SEAT
Put the canopy on top of the car seat then fasten the clips on both sides of the canopy with the clips on both sides of the seat, lastly fasten the clips on the central of the canopy on the
seat.
19. POSITIONING THE SEAT HANDLE
Press simultaneously the buttons that are positioned on the both sides of the seat handle, then twist the seat handle backwards until you hear a "click" sound that will indicate it fits
properly. In order to reverse the seat handle press simultaneously the buttons that are on the both sides of the handle and twist the handle forward.
20. SECURING THE HARNESS
Align the superior clasps, then put them together into the central budding clasp and then push them towards the inside until you hear a "click" sound indicating they fit properly.
21. LOOSENING THE HARNESS
Press the button that is positioned on the lower side of the central budding clasp, then pull out the belts.
22. ADJUSTING THE SEATBELTS
In order to adjust the seatbelts, push lever that is positioned below the canopy, pull the superior part of the seatbelts that covers the shoulders in order to obtain the wanted position.
In order to change the position of the seatbelts, pull the belt that comes out of the front side of the seat.
23. INSTALLING THE CAR SEAT ONTO THE STROLLER
Align the closing mechanisms of the seat with the lock that is positioned on the central part of the chasis, push down the locking mechanism until you hear a "click" sound that will
indicate the mechanisms have come together properly. (Photos 48-49)
24. UNINSTALLING THE CAR SEAT
In order to take out the seat press simultaneously the buttons that unblock the closing mechanism on both sides of the seat and pick up the seat.
CARE AND MAINTENANCE
1. To clean the metal parts, wipe with a moist and then dry towel until the stroller is all dry.
2. To clean the plastic parts, use a towel,water and a soft detergent.
3. To clean the textile parts, use a solution for cleaning tapestries.
4. When not in use, never place other objects in or on the stroller! This will damage it!
5. Always dry and air the stroller if it is not dry enough!
6. Run regular clean-ups over the wheel axes and the plastic elements.
7. Always clean the wheel axes and plastic elements after using the pram over sandy or dusty surfaces!
8. D0 NOT LUBRICATE the wheel axes or other movable parts of the stroller!Just clean them!
9. Run regular checks for loose or damaged parts and if there are such, immediately replace them with new ones!
Produced for Kika Group Ltd., Vasil Levski 121, Plovdiv, Bulgaria. Made in China.
This product complies with ECE R129, EN 1888-1:2018+А1:2022; EN 1888-2:2018+A1:2022.
ENGLISH