Publicidad
M4MTP25-2 by MacAllister
M4MTP25-2
M4MTP25-2 by MacAllister
M4MTP25-2 by MacAllister
NOTE: During idle running the cutting blade should not
move. Contact a qualified technician if you find that the
NOTE: During idle running the cutting blade should not
NOTA: a ralentí, la cuchilla de corte no debe moverse. si se mueve, póngase
cutting blade is moving.
move. Contact a qualified technician if you find that the
en contacto con un técnico cualificado.
cutting blade is moving.
Warm Start
Arranque en caliente
Warm Start
>
Place the product on a flat, stable surface. Ensure that the
Warm Start
>
Coloque el producto sobre una superficie estable y lisa. Asegúrese de que el accesorio
>
Place the product on a flat, stable surface. Ensure that the
attachment in use does not touch the ground or any objects.
>
Place the product on a flat, stable surface. Ensure that the
en uso no toca el suelo o cualquier objeto.
attachment in use does not touch the ground or any objects.
> Set the ignition switch (A19) to its on position "I". (See Fig. 15a)
attachment in use does not touch the ground or any objects.
>
Ponga el interruptor de encendido (a19) en la posición "I". (consulte la Fig. 15a)
> Set the ignition switch (A19) to its on position "I". (See Fig. 15a)
> Set the ignition switch (A19) to its on position "I". (See Fig. 15a)
> Move the choke lever (A3) to the position
> Move the choke lever (A3) to the position
> Move the choke lever (A3) to the position
primer.(See Fig. 15b)
>
Mueva la palanca del estrangulador (a3) a la posición
primer.(See Fig. 15b)
primer.(See Fig. 15b)
(consulte la Fig. 15b).
M4MTP25-3663602627838-MAC-ES-V01.indd 41
Fig. 14e
Fig. 14e
Fig. 14e
NOTE: During idle running the cutting blade should not
move. Contact a qualified technician if you find that the
cutting blade is moving.
Fig. 15a
Fig. 15a
Fig. 15a
Fig. 15b
Fig. 15b
Operation Instruction
Instrucciones de funcionamiento
Operation Instruction
Operation Instruction
Fig. 14e
Fig. 15a
Do not press the
.
Do not press the
.
Do not press the
.
. no presione el cebador
A3
A3
A3
Fig. 15b
Fig. 15b
EN
EN
EN
40
41
40
40
4/18/2018 11:10:58 AM
Publicidad
