Control Panel Identification; Battery Power - Mizuhosi hana 6875 Manual Del Propietário

2.3 Control Panel Identification

1
The control panel is divided into 3 sections:
Section 1: Femur lift control section. Selection switch changes between right and left femur
lift operation. Indicator displays status of femur lift connection (left, right). Indicator displays
status of foot pedal connection. (Indicator illuminated: Parts are connected, Indicator not
illuminated: Parts not connected)
Control pad section.
Section 2:
up/down, lateral tilt and trendelenburg; see section 3.4 for operation of the hand pendant and
control pad.
Section 3: Power indicator section. LED indicators notify user of the following conditions
when illuminated:
1. Battery condition
a. BATTERY CHARGE: Battery power low or no battery installed.
b. BATTERY OK: Battery has sufficient power to operate table
c. AC POWER: Indicates table is running on line (100, 120, 230 VAC) power from
wall receptacle.
d. BATTERY POWER: Indicates table is running from internal battery power.
MIZUHOSI 2009
Femur lift
control
section
Figure 4: Control panel
The control pad and the hand pendant control table
Control pad
2
section
Release
button
10
Power
indicator
3
section
NW0508 Rev. D