Mizuhosi hana 6875 Manual Del Propietário página 27

Figure 20: Locking and unlocking the removable jack mount
Installation:
To reinstall the removable jack mount, place the assembly to the left of the attachment point,
align the dove tail then slide the assembly from left to right until the silver lock lever drops
into place (figure 18). Tighten the ratchet black lever handle by clockwise rotation until fully
tightened. Do not attempt to reinstall the removable jack mount with the femur lifts attached.
WARNING:
Before every use, visually inspect that the silver lock lever is fully engaged by noting
the handle is pointing downwards and the ratchet black lever handle is tight (figure
18). Failure to perform these actions can result in the removable jack mount falling off
while the table is being tilted and cause injury to the patient.
MIZUHOSI 2009 27 NW0508 Rev. D