Mizuhosi hana 6875 Manual Del Propietário página 45

13. Attach lower leg support (6850-170) to operative side leg spar using an ACCESSORY
CLAMP (5855-61).
14. Install the arm boards with pad (6875-292) and optional cross arm support (5857)
using a clark socket (5393) to the non-operative side of the table and secure the
patient's arms.
15. Remove patient transfer board (6875-742) by unclamping it from the leg spar and
sliding it out from underneath the fully positioned patient.
16. Trial position the C-arm unit on the non-operative side.
17. Install the head end drape rod assembly (6875-747) at the head end of the table and
the foot end drape rod assembly (6875-750) on the appropriate leg spar at the foot
end of the table with hole on the outside. Adjust to the appropriate height and lock.
MIZUHOSI 2009 45 NW0508 Rev. D