Descargar Imprimir esta página

Blackmagic Design ATEM 1 M/E Manual De Instalación Y Funcionamiento página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 547
Getting Started
15
Follow install prompts.
Installing Blackmagic ATEM Software on Windows
Step 1. Ensure you have the very latest driver. Visit www.blackmagicdesign.com/support
Step 2. Open the "Blackmagic ATEM Switchers" folder and launch the "Blackmagic ATEM Switchers
Installer".
Step 3. The software will now be installed on your system. An alert will appear: "Do you want to allow the
following program to install software on this computer?" Click Yes to continue.
Step 4. You will see a dialog bubble saying "found new hardware" and the hardware wizard will appear.
Select "install automatically" and the system will find the required Desktop Video drivers. You will
then receive another dialog bubble saying "your new hardware is ready for use."
Step 5. Now restart your computer to enable the new software drivers.
Plugins and Applications that are Installed
The ATEM Switchers software installs the following components which are used by ATEM Switchers:
‚ ATEM Software Control
‚ ATEM Setup Utility
‚ Blackmagic Desktop Video drivers
‚ Blackmagic Media Express
‚ Blackmagic UltraScope
The ATEM Switchers software also installs additional Blackmagic Desktop Video components which are
used by other Blackmagic Design capture products when installed on the same computer:
Once the computer has restarted, all the ATEM software applications will be installed and can be accessed
from Start > Programs > Blackmagic Design.
In the ATEM Switchers folder, you will see the ATEM Software Control, which is the software control panel for
your switcher, which also allows loading graphics into the switcher media pool and changing settings. The
ATEM Setup Utility allows you to change the switcher IP address, or update the switcher and panel software
via USB. Also included in this folder is this instruction manual and some example graphics. Use the example
graphics to explore the internal media pool and keying functionality.
In the Media Express folder, you will see Blackmagic Media Express which allows you to capture the
Program Output of ATEM Television Studio to H.264 files. Media Express also allows you to capture the
uncompressed Aux 1 output of ATEM 1 M/E and 2 M/E Production Switchers via USB 3.0, which is perfect for
post production. In the UltraScope folder, you will see Blackmagic UltraScope which allows you to perform
live waveform monitoring of the Aux 1 output of ATEM 1 M/E and 2 M/E Production Switchers via USB 3.0.

Publicidad

loading

Este manual también es adecuado para:

Atem 2 m/e