EMAK BCH 500 Manual De Uso Y Mantenimiento página 36

EN
1 INTRODUCTION
Thank you for having chosen an Emak product.
Our network of authorised dealers and workshops are available to help you whatever your
requirements may be.
DANGER
For a correct use of the machine and to avoid accidents, do not start work without having read
this manual with the utmost attention.
This manual contains explanations on how to operate the various components and instructions for
the necessary checks and maintenance.
The descriptions and illustrations contained in this manual are not strictly binding. The
Manufacturer reserves the right to make changes without committing to updating this manual each
time.
1.1 PURPOSE OF THE MANUAL
This manual contains instructions for the use and maintenance of brushcutters:
Brand
Efco
Oleo-Mac
The manufacturer of the machine supplied, in one of the possible models, is:
1.2 HOW TO USE THE MANUAL
In addition to the instructions for use and maintenance, this manual contains information that
requires special attention. This information is marked with the symbols described below:
DANGER
Failure to comply with the warning leads to an imminent situation of risk which, if not
avoided, will cause instant death or serious or permanent damage.
WARNING
Failure to comply with the warning leads to a potential situation of risk which, if not avoided,
can cause death or serious damage to health.
ATTENTION
Failure to comply with the warning leads to a potential situation of risk which, if not avoided,
could cause minor damage to the machine.
NOTE
This provides additional information to the instructions of the previous safety messages.
30
Model
DSH 5000 S - DSH 5000 T
BCH 500 S - BCH 500 T
Emak S.p.A.
Via Enrico Fermi 4, 42011
Bagnolo in Piano (RE) Italy
www.myemak.com